Formulas Need Help, contact us
Introduction
Standard and
Stainless steel 316
Gas springs
Gate gas springs
End-fittings
Brackets
Special sizes
Locking springs
Aerospace springs
Airpot products
 
Main photo   Photo 1   Photo 2    
Open a printer friendly window


Images are for illustration purposes only
89B200450TT0600


Range
Part number 89B200450TT0600

Important note: This part number is for a gas spring charged at maximum force ONLY.
Gas springs should be charged to match your unique requirements: Please specify the force you require using the last four digits of the part number.
Description Size 8-200 Euroline standard gas spring
Force adjustement: SRV
M5 Threaded ends on both sides
Tube material: Black painted mild steel
Rod material: Chrome plated mild steel
Tube thread: Brass
Drawing
Rod Diameter 8 mm (0.31 in.)
Stroke 200 mm (7.87 in.)
Shoulder Length 450 mm (17.72 in.)
Force Range From 100 newtons (22 lbs.)
Up to 600 newtons (135 lbs.)
Maximum force P1 600 Newtons (135 lbs.)
K Factor 1.3
Force Graph Force Graph
Damping 10mm (0.39 in.)
Force adjustable External Side Release Valve (SRV)
This is the only valve which allows you to adjust the force very slowly while the gas spring is already fitted on the application (2mm Allen Key required).
Advantage: This method of reducing the force on gas springs is especially recommended when the force has to be reduced in a very controlled manner or when it is installed by non-technical persons.
Inconvenient: It is possible for a member of the public to tamper with the force after the gas spring has been fitted on the application.
Net Weight 0.223 kilogram (0.49 lbs.)
Availability Our production can manufacture up to 26 of these gas springs within 2 days from receipt of order

(status updated: 02/09/2010)
   



End-fittings specifically designed for this gas spring
Picture Part Number Description Maximum Recommended Force P1
F06-CM Metal clevis to fit M6 threads. A=24mm
Crosshole=6.0mm
Material: Zinc plated, yellow or clear passivated mild steel		 600 newtons (135 lbs.)
F06-EME Metal eye to fit M6 threads.
A=25mm
Crosshole=8.0mm
Material: Aluminium		 600 newtons (135 lbs.)
F06-MB-D10 Metal ball joint to fit M6 threads.
A=25mm
Complete with 10mm ball, M6 stud
Material: Zinc plated, clear passivated mild steel		 600 newtons (135 lbs.)




List of all end-fittings that could fit this gas spring
(please check all details before ordering)
Picture Part Number Description Maximum Recommended Force P1
F06-XB Nylon ball joint to fit M6 threads.
A=18mm
Complete with 8mm ball, M5 stud
Ball socket material: Black Nylon
Stud material: Stainless steel 304
Note: Recommended maximum force of 250 Newtons		 250 newtons ( 56 lbs.)
F06-XC-PC Stainless steel clevis to fit M6 threads.
A=24mm
Crosshole=6.0mm
Material: Stainless steel 303		 600 newtons ( 135 lbs.)
F06-XMB-D10 Stainless steel ball joint to fit M6 threads.
A=25mm
Complete with 10mm ball, M6 stud
Material: Stainless steel 304		 600 newtons ( 135 lbs.)
F06-XMB Stainless steel ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M5 stud
Material: Stainless steel 304		 400 newtons ( 90 lbs.)
F06-XME Stainless steel eye to fit M6 threads.
A=18mm
Crosshole=6.2mm
Material: Stainless steel 304		 400 newtons ( 90 lbs.)
F06-XEME Stainless steel eye to fit M6 threads.
A=25mm
Crosshole=8.2mm
Material: Stainless steel 304		 600 newtons ( 135 lbs.)
F06-8ME Volumeline Metal eye to fit M6 threads.
A=18mm
Crosshole=8.0mm
Material: Aluminium		 700 newtons ( 157 lbs.)
F06-VBS-D10 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=18mm
Supplied with metal locking ring to lock the ball stud in position		 700 newtons ( 157 lbs.)
F06-VB8 Plastic ball joint supplied complete with M8 stud
Suitable for M6 threads
A=18mm
Lift the locking ring with a flat screwdriver to unlock the ball stud		 700 newtons ( 157 lbs.)
F06-VB6 Plastic ball joint supplied complete with M6 stud
Suitable for M6 threads
A=18mm
Lift the locking ring with a flat screwdriver to unlock the ball stud		 700 newtons ( 157 lbs.)
F06-B Nylon ball joint to fit M6 threads.
A=18mm
Complete with 8mm ball, M5 stud
Ball socket material: Black Nylon
Material: Zinc plated, yellow or clear passivated mild steel
Note: Recommended maximum force of 250 Newtons		 250 newtons ( 56 lbs.)
F06-CM Metal clevis to fit M6 threads. A=24mm
Crosshole=6.0mm
Material: Zinc plated, yellow or clear passivated mild steel		 600 newtons ( 135 lbs.)
F06-E Plastic eye to fit M6 threads.
A=17.5mm
Crosshole=6.35mm
Material: Black nylon		 400 newtons ( 90 lbs.)
F06-MB8-D8 Metal ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M8 stud
Material: Zinc plated, clear passivated mild steel		 400 newtons ( 90 lbs.)
F06-MB-D10 Metal ball joint to fit M6 threads.
A=25mm
Complete with 10mm ball, M6 stud
Material: Zinc plated, clear passivated mild steel		 600 newtons ( 135 lbs.)
F06-MB Metal ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M5 stud
Material: Zinc plated, clear passivated mild steel		 400 newtons ( 90 lbs.)
F06-ME Metal eye to fit M6 threads.
A=18mm
Crosshole=6.0mm
Material: Aluminium		 700 newtons ( 157 lbs.)
F06-EME Metal eye to fit M6 threads.
A=25mm
Crosshole=8.0mm
Material: Aluminium		 600 newtons ( 135 lbs.)
F06-ME-004 Metal eye to fit M6 threads.
A=28.5mm
Crosshole=6.1mm
Material: Mild Steel - Zinc plated, clear or yellow passivated
This is a special product manufactured against purchase orders only.		 400 newtons ( 90 lbs.)
F06-VBS-D10-001 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=20mm
Supplied with plastic locking pin to lock the ball stud in position		 700 newtons ( 157 lbs.)
F06-VBS-D10-002 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=25mm
Supplied with plastic locking pin to lock the ball stud in position		 700 newtons ( 157 lbs.)

©2003-2010 - Industrial Gas Springs Ltd
sales@igsltd.co.uk
tel: +44(0)208 646 6595