Formulas Need Help, contact us
Introduction
Standard and
Stainless steel 316
Gas springs
Gate gas springs
End-fittings
Brackets
Special sizes
Locking springs
Aerospace springs
Airpot products
 
Main photo   Photo 1   Photo 2   Photo 3  
Open a printer friendly window


Images are for illustration purposes only
66G000225TT0400


Range
Part number 66G000225TT0400

Important note: This part number is for a gas spring charged at maximum force ONLY.
Gas springs should be charged to match your unique requirements: Please specify the force you require using the last four digits of the part number.
Description Size 6-150 Customline standard gas spring
Force adjustement: Internal Release Valve
M6 Threaded ends on both sides
Material: Mild steel - Chrome plated rod.
Drawing
Rod Diameter 6 mm (0.24 in.)
Stroke 150 mm (5.91 in.)
Shoulder Length 364 mm (14.33 in.)
Force Range From 40 newtons (9 lbs.)
Up to 400 newtons (90 lbs.)
Maximum force P1 400 Newtons (90 lbs.)
K Factor 1.2
Force Graph Force Graph
Damping 10mm (0.39 in.)
Force adjustable Internal valve (TV or RV)
The force of this gas springs can only be adjusted when the spring is not fitted on the application
Advantage: This is ideal if you do not want the end-user to tamper with the force.
Inconvenient: Adjusting the force is slightly more difficult and less accurate than SRV Valve because the process to achieve a suitable force is trial and error.
Net Weight 0.125 kilogram (0.28 lbs.)
Availability Our production can manufacture up to 14 of these gas springs within 2 days from receipt of order

(status updated: 02/09/2010)
   



End-fittings specifically designed for this gas spring
Picture Part Number Description Maximum Recommended Force P1
F06-B Nylon ball joint to fit M6 threads.
A=18mm
Complete with 8mm ball, M5 stud
Ball socket material: Black Nylon
Material: Zinc plated, yellow or clear passivated mild steel
Note: Recommended maximum force of 250 Newtons		 250 newtons (56 lbs.)
F06-CM Metal clevis to fit M6 threads. A=24mm
Crosshole=6.0mm
Material: Zinc plated, yellow or clear passivated mild steel		 600 newtons (135 lbs.)
F06-E Plastic eye to fit M6 threads.
A=17.5mm
Crosshole=6.35mm
Material: Black nylon		 400 newtons (90 lbs.)
F06-MB Metal ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M5 stud
Material: Zinc plated, clear passivated mild steel		 400 newtons (90 lbs.)
F06-ME Metal eye to fit M6 threads.
A=18mm
Crosshole=6.0mm
Material: Aluminium		 700 newtons (157 lbs.)




List of all end-fittings that could fit this gas spring
(please check all details before ordering)
Picture Part Number Description Maximum Recommended Force P1
F06-XB Nylon ball joint to fit M6 threads.
A=18mm
Complete with 8mm ball, M5 stud
Ball socket material: Black Nylon
Stud material: Stainless steel 304
Note: Recommended maximum force of 250 Newtons		 250 newtons ( 56 lbs.)
F06-XC-PC Stainless steel clevis to fit M6 threads.
A=24mm
Crosshole=6.0mm
Material: Stainless steel 303		 600 newtons ( 135 lbs.)
F06-XMB-D10 Stainless steel ball joint to fit M6 threads.
A=25mm
Complete with 10mm ball, M6 stud
Material: Stainless steel 304		 600 newtons ( 135 lbs.)
F06-XMB Stainless steel ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M5 stud
Material: Stainless steel 304		 400 newtons ( 90 lbs.)
F06-XME Stainless steel eye to fit M6 threads.
A=18mm
Crosshole=6.2mm
Material: Stainless steel 304		 400 newtons ( 90 lbs.)
F06-XEME Stainless steel eye to fit M6 threads.
A=25mm
Crosshole=8.2mm
Material: Stainless steel 304		 600 newtons ( 135 lbs.)
F06-8ME Volumeline Metal eye to fit M6 threads.
A=18mm
Crosshole=8.0mm
Material: Aluminium		 700 newtons ( 157 lbs.)
F06-VBS-D10 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=18mm
Supplied with metal locking ring to lock the ball stud in position		 700 newtons ( 157 lbs.)
F06-VB8 Plastic ball joint supplied complete with M8 stud
Suitable for M6 threads
A=18mm
Lift the locking ring with a flat screwdriver to unlock the ball stud		 700 newtons ( 157 lbs.)
F06-VB6 Plastic ball joint supplied complete with M6 stud
Suitable for M6 threads
A=18mm
Lift the locking ring with a flat screwdriver to unlock the ball stud		 700 newtons ( 157 lbs.)
F06-B Nylon ball joint to fit M6 threads.
A=18mm
Complete with 8mm ball, M5 stud
Ball socket material: Black Nylon
Material: Zinc plated, yellow or clear passivated mild steel
Note: Recommended maximum force of 250 Newtons		 250 newtons ( 56 lbs.)
F06-CM Metal clevis to fit M6 threads. A=24mm
Crosshole=6.0mm
Material: Zinc plated, yellow or clear passivated mild steel		 600 newtons ( 135 lbs.)
F06-E Plastic eye to fit M6 threads.
A=17.5mm
Crosshole=6.35mm
Material: Black nylon		 400 newtons ( 90 lbs.)
F06-MB8-D8 Metal ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M8 stud
Material: Zinc plated, clear passivated mild steel		 400 newtons ( 90 lbs.)
F06-MB-D10 Metal ball joint to fit M6 threads.
A=25mm
Complete with 10mm ball, M6 stud
Material: Zinc plated, clear passivated mild steel		 600 newtons ( 135 lbs.)
F06-MB Metal ball joint to fit M6 threads.
A=22mm
Complete with 8mm ball, M5 stud
Material: Zinc plated, clear passivated mild steel		 400 newtons ( 90 lbs.)
F06-ME Metal eye to fit M6 threads.
A=18mm
Crosshole=6.0mm
Material: Aluminium		 700 newtons ( 157 lbs.)
F06-EME Metal eye to fit M6 threads.
A=25mm
Crosshole=8.0mm
Material: Aluminium		 600 newtons ( 135 lbs.)
F06-ME-004 Metal eye to fit M6 threads.
A=28.5mm
Crosshole=6.1mm
Material: Mild Steel - Zinc plated, clear or yellow passivated
This is a special product manufactured against purchase orders only.		 400 newtons ( 90 lbs.)
F06-VBS-D10-001 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=20mm
Supplied with plastic locking pin to lock the ball stud in position		 700 newtons ( 157 lbs.)
F06-VBS-D10-002 Plastic ball socket for Diam 10mm ball studs
Suitable for M6 threads
A=25mm
Supplied with plastic locking pin to lock the ball stud in position		 700 newtons ( 157 lbs.)

©2003-2010 - Industrial Gas Springs Ltd
sales@igsltd.co.uk
tel: +44(0)208 646 6595