Industrial Gas Springs Ltd - Product details for Part Number 43G000110TP0150


Introduction

Standard and Stainless steel 316 Gas springs

Gate gas springs

End-fittings

Brackets

Special sizes

Locking springs

Aerospace springs

Airpot products

Images are for illustration purposes only
43G000110TP0150

Range
Part number	43G000110TP0150 Important note: This part number is for a gas spring charged at maximum force ONLY. Gas springs should be charged to match your unique requirements: Please specify the force you require using the last four digits of the part number.
Description	Size 4-40 Customline standard gas spring Force adjustement: None Integral metal eye on tube. M4 Thread on rod. Material: Mild steel - Chrome plated rod.
Drawing
Rod Diameter	4 mm (0.16 in.)
Stroke	40 mm (1.57 in.)
Shoulder Length	110 mm (4.33 in.)
Force Range	From 20 newtons (4 lbs.) Up to 150 newtons (34 lbs.)
Maximum force P1	150 Newtons (34 lbs.)
K Factor	1.2
Force Graph
Damping	10mm (0.39 in.)
Force adjustable	No force adjustment included Once charged, it is not possible to adjust the force on this gas spring without destroying some of its components.
Net Weight	30 gram (1.1 ounce)
Availability	Our production can manufacture up to 18 of these gas springs within 2 days from receipt of order (status updated: 02/09/2010)

End-fittings specifically designed for this gas spring
Picture	Part Number	Description	Maximum Recommended Force P1
	F04-C	Metal clevis to fit M4 threads. A=16mm Crosshole=4.0mm Material: Zinc plated, yellow or clear passivated mild steel	150 newtons (34 lbs.)
	F04-ME	Metal eye to fit M4 threads. A=12mm Crosshole=4.0mm Material: Aluminium	150 newtons (34 lbs.)

List of all end-fittings that could fit this gas spring (please check all details before ordering)
Picture	Part Number	Description	Maximum Recommended Force P1
	F04-XC-PC	Stainless steel clevis to fit M4 threads. A=16mm Crosshole=4.0mm Material: Stainless steel 303	150 newtons ( 34 lbs.)
	F04-XME	Stainless steel eye to fit M4 threads. A=12mm Crosshole=4.0mm Material: Stainless steel 304	150 newtons ( 34 lbs.)
	F04-B	Special nylon ball joint to fit M4 threads. A=18.5mm Complete with 8mm ball, M5 stud Ball socket material: Black Nylon Stud material: Zinc plated, yellow or clear passivated mild steel Note: Recommended maximum force of 150N	150 newtons ( 34 lbs.)
	F04-C	Metal clevis to fit M4 threads. A=16mm Crosshole=4.0mm Material: Zinc plated, yellow or clear passivated mild steel	150 newtons ( 34 lbs.)
	F04-ME	Metal eye to fit M4 threads. A=12mm Crosshole=4.0mm Material: Aluminium	150 newtons ( 34 lbs.)

This page was last checked on 14/05/2008 (JPD).

sales@igsltd.co.uk

tel: +44(0)208 646 6595